Antimu Engineering Company Private Limited - Induction Heater

Home > Product Line > Induction Heaters > Easytherm 3.5

* Maximum outer diameter and width can be increased with the use of extension yokes. Features

  * Fast controllable and safe heating process. Cos phi>0.08
  * Elimination of hot oil bath. No risk of localized overheating.
  * 'TURBO BOOST' in the horizontal position doubles heating speed.
  * Continuous use without the need for a coooling system.
  * Automatic power regulation. No manual pre-setting.
  * Continuous monitored process by probe and microprocessor.
  * Suitable for sealed, shielded bearings, pre-freased bearings and bearings with polyamide cages.

Technical Data

Voltage :	110 - 230 V	Power :	3.6 kVA
Heater Mass :	31 kg	Timer Accuracy :	0.01 seconds
Temperature Mode :	max. 240/400 °C	Frequency :	50 or 60 Hz
Temperature Control Accuracy :	± 2 °C	Residual Magnetism :	< 2A/cm
Width (D) & Height (E) U-core :	180 & 160 mm

Particulars	Minimum Bore Diameter	Maximum Outer Diameter	Maximum Width	Maximum Weight
(10 x 10 x 280) :	15 mm	330 mm	180 mm	5 kg
(14 x 14 x 280) :	20 mm	345 mm	180 mm	15 kg
(25 x 25 x 280) :	35 mm	355 mm	180 mm	25 kg
(40 x 40 x 280) :	60 mm	360 mm	180 mm	40 kg
(50 x 50 x 280) :	70 mm	410 mm	180 mm	35/70 kg