Antimu Engineering Company Private Limited - Induction Heater

Home > Product Line > Induction Heaters > Easytherm 15

* Maximum outer diameter and width can be increased with the use of extension yokes. Features

  * Fast controllable and safe heating process. Cos phi>0.08
  * Elimination of hot oil bath. No risk of localized overheating.
  * 'TURBO BOOST' in the horizontal position doubles heating speed.
  * Continuous use without the need for a coooling system.
  * Automatic power regulation. No manual pre-setting.
  * Continuous monitored process by probe and microprocessor.
  * Suitable for sealed, shielded bearings, pre-freased bearings and bearings with polyamide cages.

Technical Data

Voltage :	380 - 480 V	Power :	12.8 kVA
Heater Mass :	51 kg	Timer Accuracy :	0.01 seconds
Temperature Mode :	max. 240/400 °C	Frequency :	50 or 60 Hz
Temperature Control Accuracy :	± 2 °C	Residual Magnetism :	< 2A/cm
Width (D) & Height (E) U-core :	210 & 215 mm

Particulars	Minimum Bore Diameter	Maximum Outer Diameter	Maximum Width	Maximum Weight
(20 x 20 x 350) :	30 mm	460 mm	210 mm	15 kg
(30 x 30 x 350) :	45 mm	475 mm	210 mm	20 kg
(40 x 40 x 350) :	55 mm	485 mm	210 mm	25 kg
(50 x 50 x 350) :	70 mm	500 mm	210 mm	35 kg
(60 x 60 x 350) :	85 mm	515 mm	210 mm	60 kg
(70 x 70 x 350) :	100 mm	515 mm	210 mm	150 kg